Hallenbarter & Russi Gebäudetechnik AG
3988 Obergoms · about 99.6 km
Obergoms-based company specializing in sanitary installations, heating systems, roofing, and tinsmith work for new builds and renovations.
hallenbarter-russi.chHeat pump installation · Chur
Heat pump installation in Chur: Your renovation guide
Planning to modernize your heating system in Chur? Installing a heat pump is a sustainable way to improve your home's energy efficiency in the canton of Graubünden. This guide covers the essential steps for a successful thermal transition. From meeting noise regulations to correctly sizing your equipment based on the local climate, careful planning is key. Use the free RenoIndex estimator to determine the budget required for your project and ensure your renovation is a success from the very start of the process.
At a glance
- Typical budget
- CHF 39'000 – CHF 72'600
- Midpoint
- CHF 54'500
- Grants found
- 0
- Nearby companies
- 4
Worked examples in Chur
Small project
CHF 30'900 – CHF 56'400
Typical project
CHF 39'000 – CHF 72'600
Large project
CHF 51'100 – CHF 96'800
| Project | Quantity | Low | High | Per unit |
|---|---|---|---|---|
| Small project | 80 m² | CHF 30'900 | CHF 56'400 | CHF 500 |
| Typical project | 160 m² | CHF 39'000 | CHF 72'600 | CHF 300 |
| Large project | 280 m² | CHF 51'100 | CHF 96'800 | CHF 300 |
Computed with our estimator for Chur (regional factor included), standard finish. Only the project size changes.
Cost split (typical project)
- Labour : CHF 21'800 (40 %)
- Materials : CHF 27'300 (50 %)
- Other costs : CHF 5'500 (10 %)
What the price covers
Included
- Supply and installation
- VAT
- Heat pump and standard connections; removal and equipment only according to answers
Not included
- Permits and architect fees
- Unexpected structural issues
- Possible subsidies
- Drilling beyond 150 m, buried or contaminated tank, asbestos, insulation and new finishes
- With air-to-air: hot water and ducts only if selected; adaptations beyond the options excluded
Chur's housing stock in figures
In Chur, the federal building register lists 4'785 residential buildings and 21'817 dwellings. These municipal benchmarks help put your home in context, but do not replace an individual assessment.
Age of residential buildings
64 % built before 1980
- Before 191919 %
- 1919–194512 %
- 1946–196013 %
- 1961–197010 %
- 1971–198010 %
- 1981–19909 %
- 1991–20008 %
- 2001–201010 %
- Since 20119 %
Construction year does not reveal past renovations: check the current insulation condition.
Main heating energy
43 % · Gas
- Gas43 %
- Heating oil22 %
- Heat pump18 %
- Wood9 %
- District heating6 %
- Electricity2 %
This distribution describes recorded buildings, not your system's consumption or efficiency.
Heating and hot water: which energies?
| Energy | Heating | Hot water |
|---|---|---|
| Gas | 43 % | 38.9 % |
| Heating oil | 22 % | 22.5 % |
| District heating | 6 % | 5.3 % |
| Heat pump | 18 % | 12.6 % |
| Electricity | 2 % | 15.3 % |
| Wood | 9 % | 2.3 % |
| Solar thermal | 0 % | 2.6 % |
Each line gives the share of buildings using that energy, separately for heating and for hot water. The two columns do not always reach 100%: some buildings combine two systems, or reported none.
Type of heating system
- Boiler (unspecified)62.4 %
- Heat pump18.5 %
- Stove7.7 %
- Heat exchanger (district)6 %
- Condensing boiler3.2 %
- Central electric heating1.6 %
- Direct electric heaters0.5 %
A standard non-condensing boiler is usually older and less efficient.
Renovations, heritage and volumes
For homeowners planning renovations in Chur, the federal building register indicates a median house volume of 1062.5 m3, which serves as a baseline for assessing the scale of insulation or heating system upgrades. It is important to note that this figure is based on only 8 out of 2392 recorded houses, representing a very partial data coverage. Furthermore, information regarding heritage protection is largely unavailable for the 4785 listed buildings. Given these gaps in documentation, we strongly advise contacting the municipality directly to verify local permit requirements and any potential conservation restrictions before proceeding with your renovation plans.
0
buildings flagged as protected
status known for 822 of 4'785 buildings; check with the municipality
1'062.5 m³
median house volume (SIA 416)
measured for 8 of 2'392 houses
Source : OFS — RegBL (export communal complet). Existing residential buildings; percentages of recorded values.
Checking district heating networks
Before starting your heat pump installation project in Chur, it is vital to check if your area can connect to a priority district heating network. In many municipalities, connecting to district heating is preferred to reduce environmental impact.
Review your local energy zoning plans to confirm your available options. If your property is located in a priority district heating zone, this solution might be mandatory or strongly recommended over an individual heat pump.
Early investigation will help you avoid complications and ensure compliance with local energy strategies.
The importance of thermal sizing
The climate in Graubünden places specific demands on heating technology. The local design outdoor temperature is a decisive factor for the performance and capacity of your heat pump.
An undersized unit will fail to heat your home during severe winters, while an oversized one will lead to unnecessary costs and premature wear.
Precise calculation based on your building's actual heat demand, taking local winters into account, is essential for year-round energy efficiency. Consult with a professional to ensure your equipment is perfectly matched to the specific climate.
Noise regulations for outdoor units
During planning, position the unit to minimize noise nuisance, avoiding locations near bedroom windows or property lines. Soundproofing measures may be required to ensure your installation complies with Swiss noise protection regulations.
Taking these steps early will ensure your project remains compliant and helps maintain positive relationships with those living nearby.
Budgeting and planning
Renewing your heating system is a significant investment. To get a reliable cost estimate for your project in Chur, use the free online simulator provided by RenoIndex.
This tool helps you obtain a realistic price range for your installation, including equipment, installation, and any necessary auxiliary works. Remember to include fees for technical studies, soundproofing, and permit applications in your budget.
Thorough planning and an accurate understanding of costs will allow you to navigate your energy transition with peace of mind. Start your budget estimate on RenoIndex today.
Your project in 5 steps
1. Estimate
Set a budget range with the estimator.
2. Grants
Apply before work starts.
3. Quotes
Compare at least 3 quotes.
4. Permit
Check with the municipality whether a permit is needed.
5. Works
Follow the site and do a written handover.
Grants and subsidies
No specific grant listed for this work. Maintenance tax deductions may still apply.
Companies in the area
TZ Stromag, Filiale Raron
3942 Raron · about 143.6 km
TZ Stromag is a full-service provider of electrical engineering for buildings, covering installations, automation, security, and in-house switchgear construction.
stromag.chClavien Fabrice Sanitaires Sàrl
3972 Miège · about 161.7 km
Clavien Fabrice Sanitaires Sàrl in Miège provides plumbing and heating installations, including heat pumps, as well as roofing work and the installation of solar thermal and photovoltaic panels.
fabriceclavien.chF. Imeri Sàrl
2829 Vermes · about 163.3 km
The website presented under the name Imeri Chauffage et Sanitaire Sàrl offers plumbing, heating and solar thermal work, while F. Imeri Sàrl’s registered purpose refers to a scrap metal business.
imeri-sarl.chSuggestions from the commercial register by distance and activity. Not an endorsement or partnership.
Frequently asked questions
Do I need a permit for my heat pump in Chur?
Yes, it is generally necessary to submit a permit application to local authorities for heat pump installation. Contact the municipal planning department to find out about the required documentation, especially regarding compliance with local noise standards.
What is the average cost for such work?
The cost varies depending on the chosen technology and your building's specific requirements. To get a personalized price range adapted to the Swiss context, use the free RenoIndex estimator. This will give you a solid foundation for comparing quotes from installers.
How can I minimize heat pump noise?
Location is crucial. Avoid areas near bedrooms and prefer isolated spots. Installing noise barriers or choosing low-noise units can also significantly reduce nuisance. Always consult your installer to validate the optimal placement for your specific setup.
Is a heat pump efficient in the Graubünden winter?
Yes, provided it is correctly sized while accounting for the local outdoor temperature. A well-designed system operates efficiently even in cold weather, especially if the building is well insulated. Seek advice from an expert to validate your configuration.
Works often combined in Chur
Other works in Chur
Kitchen renovationBathroom renovationNew flooringInterior paintingWindow replacementRoof renovationFacade insulationSolar panelsHome solar batterySolar water heatingTerrace constructionFence installationStairwell renovationElevator installation or upgrade