Indicative price, tips, grants and companies for your project in Adliswil (Zurich).
At a glance
Typical budget
CHF 17'500 – CHF 47'000
Midpoint
CHF 29'200
Grants found
0
Nearby companies
4
Worked examples in Adliswil
Small project
CHF 12'900 – CHF 35'800
Typical project
CHF 17'500 – CHF 47'000
Large project
CHF 25'200 – CHF 65'500
Project
Quantity
Low
High
Per unit
Small project
3 m²
CHF 12'900
CHF 35'800
CHF 7'400
Typical project
6 m²
CHF 17'500
CHF 47'000
CHF 4'900
Large project
11 m²
CHF 25'200
CHF 65'500
CHF 3'700
Computed with our estimator for Adliswil (regional factor included), standard finish. Only the project size changes.
Cost split (typical project)
Labour :CHF 16'100(55 %)
Materials :CHF 10'200(35 %)
Other costs :CHF 2'900(10 %)
What the price covers
Included
Supply and installation
VAT
Preparation, floor and wall finishes, standard plumbing and electrical work
Fixtures, mirrors, accessories and removal according to answers or listed assumptions
Not included
Permits and architect fees
Unexpected structural issues
Possible subsidies
Major utility relocation, floor reinforcement or structural alterations for walk-in showers
Adliswil's housing stock in figures
In Adliswil, the federal building register lists 2'193 residential buildings and 9'760 dwellings. These municipal benchmarks help put your home in context, but do not replace an individual assessment.
68 %built before 1980
75 %heated by oil or gas
21.6 %electric hot water
1.8 %with declared solar thermal
Age of residential buildings
68 % built before 1980
Before 191911 %
1919–19459 %
1946–196013 %
1961–197022 %
1971–198013 %
1981–19909 %
1991–20009 %
2001–20105 %
Since 20118 %
Construction year does not reveal past renovations: check the current insulation condition.
Main heating energy
41 % · Heating oil
Heating oil41 %
Gas34 %
Heat pump17 %
Wood4 %
District heating2 %
Electricity2 %
This distribution describes recorded buildings, not your system's consumption or efficiency.
Dwellings by number of rooms
7.4 %1 rm
16.6 %2 rm
32.9 %3 rm
28.5 %4 rm
14.6 %5+ rm
Dwellings per building
1 dwelling43.5 %
2 to 418.5 %
5 to 927.5 %
10 to 199.4 %
20 or more1.1 %
Renovations, heritage and volumes
For your renovation plans in Adliswil, official RegBL data provides essential guidance. With a median building volume of 773 m3 for houses measured under the SIA 416 standard, you can better estimate the scale of your heating and insulation works, though please note that data coverage for volume is partial. Regarding heritage protection, one building is officially listed out of 250 known cases. Given this status, it is critical to contact the municipality early in your planning process to discuss permit requirements. Proactive communication with local authorities ensures that your project aligns with all municipal architectural and preservation regulations.
1
buildings flagged as protected
status known for 250 of 2'193 buildings; check with the municipality
Swapping a bathtub for a walk-in shower requires checking the available drain slope.
Hard water scales fittings and screens quickly: choose easy-clean surfaces.
Expect roughly 2 to 4 weeks without a usable bathroom.
Your project in 5 steps
1. Estimate
Set a budget range with the estimator.
2. Grants
Apply before work starts.
3. Quotes
Compare at least 3 quotes.
4. Permit
Check with the municipality whether a permit is needed.
5. Works
Follow the site and do a written handover.
Grants and subsidies
No specific grant listed for this work. Maintenance tax deductions may still apply.
Companies in the area
F. Imeri Sàrl
2829 Vermes · about 78.1 km
The website presented under the name Imeri Chauffage et Sanitaire Sàrl offers plumbing, heating and solar thermal work, while F. Imeri Sàrl’s registered purpose refers to a scrap metal business.