Eco6therm Sàrl
2832 Rebeuvelier · about 83.1 km
Eco6therm specializes in the installation of heating systems, particularly heat pumps, and solar photovoltaic energy solutions.
eco6therm.chSolar panels · Adliswil
Solar panels in Adliswil
Indicative price, tips, grants and companies for your project in Adliswil (Zurich).
At a glance
- Typical budget
- CHF 18'500 – CHF 33'500
- Midpoint
- CHF 25'300
- Grants found
- 0
- Nearby companies
- 4
Worked examples in Adliswil
Small project
CHF 10'000 – CHF 18'900
Typical project
CHF 18'500 – CHF 33'500
Large project
CHF 32'000 – CHF 56'800
| Project | Quantity | Low | High | Per unit |
|---|---|---|---|---|
| Small project | 5 kWc | CHF 10'000 | CHF 18'900 | CHF 2'800 |
| Typical project | 10 kWc | CHF 18'500 | CHF 33'500 | CHF 2'500 |
| Large project | 18 kWc | CHF 32'000 | CHF 56'800 | CHF 2'400 |
Computed with our estimator for Adliswil (regional factor included), standard finish. Only the project size changes.
Cost split (typical project)
- Labour : CHF 8'800 (35 %)
- Materials : CHF 13'900 (55 %)
- Other costs : CHF 2'500 (10 %)
What the price covers
Included
- Supply and installation
- VAT
- Inverter and grid connection
Not included
- Permits and architect fees
- Unexpected structural issues
- Possible subsidies
- Battery, roof refurbishment and structural reinforcement
Adliswil's housing stock in figures
In Adliswil, the federal building register lists 2'193 residential buildings and 9'760 dwellings. These municipal benchmarks help put your home in context, but do not replace an individual assessment.
Age of residential buildings
68 % built before 1980
- Before 191911 %
- 1919–19459 %
- 1946–196013 %
- 1961–197022 %
- 1971–198013 %
- 1981–19909 %
- 1991–20009 %
- 2001–20105 %
- Since 20118 %
Construction year does not reveal past renovations: check the current insulation condition.
Main heating energy
41 % · Heating oil
- Heating oil41 %
- Gas34 %
- Heat pump17 %
- Wood4 %
- District heating2 %
- Electricity2 %
This distribution describes recorded buildings, not your system's consumption or efficiency.
Heating and hot water: which energies?
| Energy | Heating | Hot water |
|---|---|---|
| Gas | 34 % | 32.7 % |
| Heating oil | 41 % | 34.8 % |
| District heating | 2 % | 0.6 % |
| Heat pump | 17 % | 4 % |
| Electricity | 2 % | 21.6 % |
| Wood | 4 % | 2.4 % |
| Solar thermal | 0 % | 2 % |
Each line gives the share of buildings using that energy, separately for heating and for hot water. The two columns do not always reach 100%: some buildings combine two systems, or reported none.
Type of heating system
- Boiler (unspecified)75.7 %
- Heat pump17.1 %
- Central electric heating1.9 %
- Heat exchanger (district)1.6 %
- Stove1.5 %
- Condensing boiler1.4 %
- Direct electric heaters0.5 %
A standard non-condensing boiler is usually older and less efficient.
Houses or apartment buildings?
- Single-family houses43.5 %
- Two-dwelling houses5.7 %
- Apartment buildings (3+)50.8 %
8.6 % of buildings mix housing with shops or offices.
The typical building
- storeys (median)
- 3
- median footprint
- 159 m²
- median dwelling area
- 80 m²
Renovations, heritage and volumes
For your renovation plans in Adliswil, official RegBL data provides essential guidance. With a median building volume of 773 m3 for houses measured under the SIA 416 standard, you can better estimate the scale of your heating and insulation works, though please note that data coverage for volume is partial. Regarding heritage protection, one building is officially listed out of 250 known cases. Given this status, it is critical to contact the municipality early in your planning process to discuss permit requirements. Proactive communication with local authorities ensures that your project aligns with all municipal architectural and preservation regulations.
1
buildings flagged as protected
status known for 250 of 2'193 buildings; check with the municipality
773 m³
median house volume (SIA 416)
measured for 4 of 953 houses
Source : OFS — RegBL (export communal complet). Existing residential buildings; percentages of recorded values.
Tips before you start
- The federal one-off remuneration (Pronovo) lowers the cost of small systems.
- Profitability depends mainly on how much power you use on site.
- A suitably integrated roof system often only needs notification.
Your project in 5 steps
1. Estimate
Set a budget range with the estimator.
2. Grants
Apply before work starts.
3. Quotes
Compare at least 3 quotes.
4. Permit
Check with the municipality whether a permit is needed.
5. Works
Follow the site and do a written handover.
Grants and subsidies
No specific grant listed for this work. Maintenance tax deductions may still apply.
Companies in the area
Zbinden & Joye SA successeur Pierre Streit
2740 Moutier · about 87.6 km
Moutier-based company specializing in tinsmithing, roofing, ventilated facades, and solar panel installation.
zbinden-joye.chBernard Monnerat
2740 Moutier · about 87.6 km
Company in Moutier specializing in plumbing, heating (oil, wood, heat pumps), and solar thermal and photovoltaic solutions.
bmonnerat.chADS Construction Sàrl
2800 Delémont · about 89.8 km
Construction and renovation company in Delémont, specializing in masonry, sanitary facilities, heating, and turnkey projects in the Jura region.
adsconstruction.chSuggestions from the commercial register by distance and activity. Not an endorsement or partnership.
Works often combined in Adliswil
Home solar battery cost in AdliswilHeat pump installation cost in AdliswilRoof renovation cost in Adliswil
Other works in Adliswil
Kitchen renovationBathroom renovationNew flooringInterior paintingWindow replacementRoof renovationFacade insulationHeat pump installationHome solar batterySolar water heatingTerrace constructionFence installationStairwell renovationElevator installation or upgrade