Eco6therm Sàrl
2832 Rebeuvelier · about 74.3 km
Eco6therm specializes in the installation of heating systems, particularly heat pumps, and solar photovoltaic energy solutions.
eco6therm.chSolar panels · Dietikon
Solar panels in Dietikon
Indicative price, tips, grants and companies for your project in Dietikon (Zurich).
At a glance
- Typical budget
- CHF 18'500 – CHF 33'500
- Midpoint
- CHF 25'300
- Grants found
- 0
- Nearby companies
- 4
Worked examples in Dietikon
Small project
CHF 10'000 – CHF 18'900
Typical project
CHF 18'500 – CHF 33'500
Large project
CHF 32'000 – CHF 56'800
| Project | Quantity | Low | High | Per unit |
|---|---|---|---|---|
| Small project | 5 kWc | CHF 10'000 | CHF 18'900 | CHF 2'800 |
| Typical project | 10 kWc | CHF 18'500 | CHF 33'500 | CHF 2'500 |
| Large project | 18 kWc | CHF 32'000 | CHF 56'800 | CHF 2'400 |
Computed with our estimator for Dietikon (regional factor included), standard finish. Only the project size changes.
Cost split (typical project)
- Labour : CHF 8'800 (35 %)
- Materials : CHF 13'900 (55 %)
- Other costs : CHF 2'500 (10 %)
What the price covers
Included
- Supply and installation
- VAT
- Inverter and grid connection
Not included
- Permits and architect fees
- Unexpected structural issues
- Possible subsidies
- Battery, roof refurbishment and structural reinforcement
Dietikon's housing stock in figures
In Dietikon, the federal building register lists 2'426 residential buildings and 12'786 dwellings. These municipal benchmarks help put your home in context, but do not replace an individual assessment.
Age of residential buildings
62 % built before 1980
- Before 191911 %
- 1919–194511 %
- 1946–196017 %
- 1961–197013 %
- 1971–198010 %
- 1981–199012 %
- 1991–20007 %
- 2001–20109 %
- Since 201110 %
Construction year does not reveal past renovations: check the current insulation condition.
Main heating energy
32 % · Heating oil
- Heating oil32 %
- Gas27 %
- Heat pump21 %
- District heating15 %
- Electricity2 %
- Wood2 %
This distribution describes recorded buildings, not your system's consumption or efficiency.
Heating and hot water: which energies?
| Energy | Heating | Hot water |
|---|---|---|
| Gas | 27 % | 24.1 % |
| Heating oil | 32 % | 27.3 % |
| District heating | 15 % | 16.3 % |
| Heat pump | 21 % | 7.3 % |
| Electricity | 2 % | 20.5 % |
| Wood | 2 % | 1.3 % |
| Solar thermal | 0 % | 1.3 % |
Each line gives the share of buildings using that energy, separately for heating and for hot water. The two columns do not always reach 100%: some buildings combine two systems, or reported none.
Type of heating system
- Boiler (unspecified)57.5 %
- Heat pump21.5 %
- Heat exchanger (district)15.1 %
- Central electric heating2.1 %
- Stove2 %
- Condensing boiler1.4 %
A standard non-condensing boiler is usually older and less efficient.
Houses or apartment buildings?
- Single-family houses43 %
- Two-dwelling houses4.8 %
- Apartment buildings (3+)52.2 %
- Other0 %
12.1 % of buildings mix housing with shops or offices.
The typical building
- storeys (median)
- 3
- median footprint
- 159 m²
- median dwelling area
- 80 m²
Renovations, heritage and volumes
For homeowners in Dietikon, leveraging register data is key to effective renovation planning. With three buildings identified as heritage protected, you must contact the municipality early to navigate specific permit requirements. Regarding scale, the median building volume is 975 cubic meters based on six structures measured via the SIA 416 standard, providing a basis for calculating insulation needs. Please note that data coverage is partial, as the vast majority of local building volumes do not follow this standardized measurement and no renovation years are recorded. Consulting municipal authorities remains a critical step for all planned structural interventions.
3
buildings flagged as protected
status known for 195 of 2'426 buildings; check with the municipality
975 m³
median house volume (SIA 416)
measured for 6 of 1'043 houses
Source : OFS — RegBL (export communal complet). Existing residential buildings; percentages of recorded values.
Tips before you start
- The federal one-off remuneration (Pronovo) lowers the cost of small systems.
- Profitability depends mainly on how much power you use on site.
- A suitably integrated roof system often only needs notification.
Your project in 5 steps
1. Estimate
Set a budget range with the estimator.
2. Grants
Apply before work starts.
3. Quotes
Compare at least 3 quotes.
4. Permit
Check with the municipality whether a permit is needed.
5. Works
Follow the site and do a written handover.
Grants and subsidies
No specific grant listed for this work. Maintenance tax deductions may still apply.
Companies in the area
Zbinden & Joye SA successeur Pierre Streit
2740 Moutier · about 79.4 km
Moutier-based company specializing in tinsmithing, roofing, ventilated facades, and solar panel installation.
zbinden-joye.chBernard Monnerat
2740 Moutier · about 79.4 km
Company in Moutier specializing in plumbing, heating (oil, wood, heat pumps), and solar thermal and photovoltaic solutions.
bmonnerat.chADS Construction Sàrl
2800 Delémont · about 80.2 km
Construction and renovation company in Delémont, specializing in masonry, sanitary facilities, heating, and turnkey projects in the Jura region.
adsconstruction.chSuggestions from the commercial register by distance and activity. Not an endorsement or partnership.
Works often combined in Dietikon
Home solar battery cost in DietikonHeat pump installation cost in DietikonRoof renovation cost in Dietikon
Other works in Dietikon
Kitchen renovationBathroom renovationNew flooringInterior paintingWindow replacementRoof renovationFacade insulationHeat pump installationHome solar batterySolar water heatingTerrace constructionFence installationStairwell renovationElevator installation or upgrade