Heat pump installation · Dietikon
At a glance
Small project
CHF 33'500 – CHF 61'400
Typical project
CHF 42'400 – CHF 78'900
Large project
CHF 55'600 – CHF 105'200
| Project | Quantity | Low | High | Per unit |
|---|---|---|---|---|
| Small project | 80 m² | CHF 33'500 | CHF 61'400 | CHF 600 |
| Typical project | 160 m² | CHF 42'400 | CHF 78'900 | CHF 400 |
| Large project | 280 m² | CHF 55'600 | CHF 105'200 | CHF 300 |
Computed with our estimator for Dietikon (regional factor included), standard finish. Only the project size changes.
Included
Not included
In Dietikon, the federal building register lists 2'426 residential buildings and 12'786 dwellings. These municipal benchmarks help put your home in context, but do not replace an individual assessment.
62 % built before 1980
Construction year does not reveal past renovations: check the current insulation condition.
32 % · Heating oil
This distribution describes recorded buildings, not your system's consumption or efficiency.
| Energy | Heating | Hot water |
|---|---|---|
| Gas | 27 % | 24.1 % |
| Heating oil | 32 % | 27.3 % |
| District heating | 15 % | 16.3 % |
| Heat pump | 21 % | 7.3 % |
| Electricity | 2 % | 20.5 % |
| Wood | 2 % | 1.3 % |
| Solar thermal | 0 % | 1.3 % |
Each line gives the share of buildings using that energy, separately for heating and for hot water. The two columns do not always reach 100%: some buildings combine two systems, or reported none.
A standard non-condensing boiler is usually older and less efficient.
For homeowners in Dietikon, leveraging register data is key to effective renovation planning. With three buildings identified as heritage protected, you must contact the municipality early to navigate specific permit requirements. Regarding scale, the median building volume is 975 cubic meters based on six structures measured via the SIA 416 standard, providing a basis for calculating insulation needs. Please note that data coverage is partial, as the vast majority of local building volumes do not follow this standardized measurement and no renovation years are recorded. Consulting municipal authorities remains a critical step for all planned structural interventions.
Source : OFS — RegBL (export communal complet). Existing residential buildings; percentages of recorded values.
1. Estimate
Set a budget range with the estimator.
2. Grants
Apply before work starts.
3. Quotes
Compare at least 3 quotes.
4. Permit
Check with the municipality whether a permit is needed.
5. Works
Follow the site and do a written handover.
No specific grant listed for this work. Maintenance tax deductions may still apply.
2829 Vermes · about 69.4 km
The website presented under the name Imeri Chauffage et Sanitaire Sàrl offers plumbing, heating and solar thermal work, while F. Imeri Sàrl’s registered purpose refers to a scrap metal business.
imeri-sarl.ch2824 Vicques · about 73.4 km
Specialist since 1968 in sanitary installations, heating (gas, oil, wood, renewable energy), and tinsmithing with 24/7 emergency repair service.
sanit.ch2824 Vicques · about 73.4 km
Buchwalder Sàrl in Vicques has specialized in the installation, repair, and renovation of heating and sanitary systems since 1966.
buchwalder-sarl.ch2824 Vicques · about 73.4 km
Gyger Haustechnik specializes in sanitary installations, heating systems, bathroom renovations, and tiling work.
gyger-co.chSuggestions from the commercial register by distance and activity. Not an endorsement or partnership.
