Heat pump installation · Uster
At a glance
Small project
CHF 33'500 – CHF 61'400
Typical project
CHF 42'400 – CHF 78'900
Large project
CHF 55'600 – CHF 105'200
| Project | Quantity | Low | High | Per unit |
|---|---|---|---|---|
| Small project | 80 m² | CHF 33'500 | CHF 61'400 | CHF 600 |
| Typical project | 160 m² | CHF 42'400 | CHF 78'900 | CHF 400 |
| Large project | 280 m² | CHF 55'600 | CHF 105'200 | CHF 300 |
Computed with our estimator for Uster (regional factor included), standard finish. Only the project size changes.
Included
Not included
In Uster, the federal building register lists 4'976 residential buildings and 17'148 dwellings. These municipal benchmarks help put your home in context, but do not replace an individual assessment.
54 % built before 1980
Construction year does not reveal past renovations: check the current insulation condition.
58 % · Gas
This distribution describes recorded buildings, not your system's consumption or efficiency.
| Energy | Heating | Hot water |
|---|---|---|
| Gas | 58 % | 47.7 % |
| Heating oil | 12 % | 11 % |
| District heating | 3 % | 2.2 % |
| Heat pump | 19 % | 17.1 % |
| Electricity | 1 % | 14.3 % |
| Wood | 7 % | 5.1 % |
| Solar thermal | 0 % | 2.4 % |
Each line gives the share of buildings using that energy, separately for heating and for hot water. The two columns do not always reach 100%: some buildings combine two systems, or reported none.
A standard non-condensing boiler is usually older and less efficient.
For renovation projects in Uster, RegBL data provides useful benchmarks for planning. With a median building volume of 640 m3, homeowners can better estimate the scale of heating or insulation upgrades. Note that data coverage is partial, as only 40 out of 2948 buildings are measured according to SIA 416 standards. Regarding heritage protection, no protected buildings are recorded among the 376 known entries, though the overall coverage remains limited. We advise you to contact the municipality early to confirm your property status and specific regulatory requirements before finalizing your renovation plans or submitting any permit applications.
Source : OFS — RegBL (export communal complet). Existing residential buildings; percentages of recorded values.
1. Estimate
Set a budget range with the estimator.
2. Grants
Apply before work starts.
3. Quotes
Compare at least 3 quotes.
4. Permit
Check with the municipality whether a permit is needed.
5. Works
Follow the site and do a written handover.
No specific grant listed for this work. Maintenance tax deductions may still apply.
2829 Vermes · about 93.2 km
The website presented under the name Imeri Chauffage et Sanitaire Sàrl offers plumbing, heating and solar thermal work, while F. Imeri Sàrl’s registered purpose refers to a scrap metal business.
imeri-sarl.ch2824 Vicques · about 97.5 km
Specialist since 1968 in sanitary installations, heating (gas, oil, wood, renewable energy), and tinsmithing with 24/7 emergency repair service.
sanit.ch2824 Vicques · about 97.5 km
Buchwalder Sàrl in Vicques has specialized in the installation, repair, and renovation of heating and sanitary systems since 1966.
buchwalder-sarl.ch2824 Vicques · about 97.5 km
Gyger Haustechnik specializes in sanitary installations, heating systems, bathroom renovations, and tiling work.
gyger-co.chSuggestions from the commercial register by distance and activity. Not an endorsement or partnership.
