Heat pump installation · Liestal
At a glance
Small project
CHF 31'500 – CHF 57'500
Typical project
CHF 39'700 – CHF 74'000
Large project
CHF 52'100 – CHF 98'600
| Project | Quantity | Low | High | Per unit |
|---|---|---|---|---|
| Small project | 80 m² | CHF 31'500 | CHF 57'500 | CHF 500 |
| Typical project | 160 m² | CHF 39'700 | CHF 74'000 | CHF 300 |
| Large project | 280 m² | CHF 52'100 | CHF 98'600 | CHF 300 |
Computed with our estimator for Liestal (regional factor included), standard finish. Only the project size changes.
Included
Not included
In Liestal, the federal building register lists 2'778 residential buildings and 8'161 dwellings. These municipal benchmarks help put your home in context, but do not replace an individual assessment.
57 % built before 1980
Construction year does not reveal past renovations: check the current insulation condition.
42 % · Gas
This distribution describes recorded buildings, not your system's consumption or efficiency.
| Energy | Heating | Hot water |
|---|---|---|
| Gas | 42 % | 34.7 % |
| Heating oil | 19 % | 10.7 % |
| District heating | 20 % | 19.2 % |
| Heat pump | 12 % | 11.7 % |
| Electricity | 3 % | 16.2 % |
| Wood | 4 % | 2.4 % |
| Solar thermal | 0 % | 5 % |
Each line gives the share of buildings using that energy, separately for heating and for hot water. The two columns do not always reach 100%: some buildings combine two systems, or reported none.
A standard non-condensing boiler is usually older and less efficient.
For your renovation projects in Liestal, data from the federal building and dwelling register provides key insights. With 663 buildings under heritage protection, it is essential to contact the municipality early to clarify permit requirements. Regarding building volume, the median value for the 25 properties measured according to the SIA 416 standard is 734 m3, which helps in scaling heating or insulation work. Please note that volume data coverage is partial, as the majority of buildings are recorded under other standards or are unknown. These figures are crucial for planning the scope of your renovation investment accurately.
Source : OFS — RegBL (export communal complet). Existing residential buildings; percentages of recorded values.
1. Estimate
Set a budget range with the estimator.
2. Grants
Apply before work starts.
3. Quotes
Compare at least 3 quotes.
4. Permit
Check with the municipality whether a permit is needed.
5. Works
Follow the site and do a written handover.
No specific grant listed for this work. Maintenance tax deductions may still apply.
2829 Vermes · about 25.9 km
The website presented under the name Imeri Chauffage et Sanitaire Sàrl offers plumbing, heating and solar thermal work, while F. Imeri Sàrl’s registered purpose refers to a scrap metal business.
imeri-sarl.ch2824 Vicques · about 26.9 km
Buchwalder Sàrl in Vicques has specialized in the installation, repair, and renovation of heating and sanitary systems since 1966.
buchwalder-sarl.ch2824 Vicques · about 26.9 km
Specialist since 1968 in sanitary installations, heating (gas, oil, wood, renewable energy), and tinsmithing with 24/7 emergency repair service.
sanit.ch2824 Vicques · about 26.9 km
Gyger Haustechnik specializes in sanitary installations, heating systems, bathroom renovations, and tiling work.
gyger-co.chSuggestions from the commercial register by distance and activity. Not an endorsement or partnership.
