Heat pump installation · Reinach (BL)

Heat pump installation in Reinach (BL)

Indicative price, tips, grants and companies for your project in Reinach (BL) (Basel-Country).
Heat pump installation – Reinach (BL)

At a glance

Typical budget
CHF 39'700 – CHF 74'000
Midpoint
CHF 55'600
Grants found
0
Nearby companies
4

Worked examples in Reinach (BL)

Small project

CHF 31'500 – CHF 57'500

Typical project

CHF 39'700 – CHF 74'000

Large project

CHF 52'100 – CHF 98'600

ProjectQuantityLowHigh
Small project80 m²CHF 31'500CHF 57'500
Typical project160 m²CHF 39'700CHF 74'000
Large project280 m²CHF 52'100CHF 98'600

Computed with our estimator for Reinach (BL) (regional factor included), standard finish. Only the project size changes.

Cost split (typical project)

  • Labour : CHF 22'200 (40 %)
  • Materials : CHF 27'800 (50 %)
  • Other costs : CHF 5'600 (10 %)

What the price covers

Included

  • Supply and installation
  • VAT
  • Heat pump and standard connections; removal and equipment only according to answers

Not included

  • Permits and architect fees
  • Unexpected structural issues
  • Possible subsidies
  • Drilling beyond 150 m, buried or contaminated tank, asbestos, insulation and new finishes
  • With air-to-air: hot water and ducts only if selected; adaptations beyond the options excluded

Reinach (BL)'s housing stock in figures

In Reinach (BL), the federal building register lists 4'176 residential buildings and 10'383 dwellings. These municipal benchmarks help put your home in context, but do not replace an individual assessment.

64 %built before 1980
81 %heated by oil or gas
14.6 %electric hot water
4.5 %with declared solar thermal

Age of residential buildings

64 % built before 1980

  • Before 19192 %
  • 1919–19455 %
  • 1946–196012 %
  • 1961–197023 %
  • 1971–198022 %
  • 1981–19909 %
  • 1991–200012 %
  • 2001–20108 %
  • Since 20118 %

Construction year does not reveal past renovations: check the current insulation condition.

Main heating energy

52 % · Gas

  • Gas52 %
  • Heating oil29 %
  • Heat pump11 %
  • District heating7 %
  • Electricity1 %
  • Wood1 %

This distribution describes recorded buildings, not your system's consumption or efficiency.

Heating and hot water: which energies?

EnergyHeatingHot water
Gas52 %46.5 %
Heating oil29 %17.4 %
District heating7 %6.7 %
Heat pump11 %9.9 %
Electricity1 %14.6 %
Wood1 %0.4 %
Solar thermal0 %4.3 %

Each line gives the share of buildings using that energy, separately for heating and for hot water. The two columns do not always reach 100%: some buildings combine two systems, or reported none.

Type of heating system

  • Boiler (unspecified)81.7 %
  • Heat pump10.7 %
  • Heat exchanger (district)6.8 %
  • Central electric heating0.8 %

A standard non-condensing boiler is usually older and less efficient.

Renovations, heritage and volumes

For renovations in Reinach, building registry data shows that 1357 out of 4176 buildings are under heritage protection, requiring early consultation with the municipality regarding permit requirements. To determine the scale of your insulation or heating works, note that the median volume of the 25 buildings measured by the SIA 416 standard is 820 m3. As data coverage is partial with 3135 houses recorded under other standards out of 3160 total houses, verify your specific building volume carefully. This ensures your renovation plan aligns with official records and local building regulations for your property.

1'357
buildings flagged as protected
status known for 4'176 of 4'176 buildings; check with the municipality
820 m³
median house volume (SIA 416)
measured for 25 of 3'160 houses

Source : OFS — RegBL (export communal complet). Existing residential buildings; percentages of recorded values.

Tips before you start

  • First check whether your area can connect to a priority district heating network.
  • The local design outdoor temperature sets the heat pump's capacity.
  • Outdoor air-water heat pumps must meet noise limits towards neighbours.

Your project in 5 steps

  1. 1. Estimate

    Set a budget range with the estimator.

  2. 2. Grants

    Apply before work starts.

  3. 3. Quotes

    Compare at least 3 quotes.

  4. 4. Permit

    Check with the municipality whether a permit is needed.

  5. 5. Works

    Follow the site and do a written handover.

Grants and subsidies

No specific grant listed for this work. Maintenance tax deductions may still apply.

Companies in the area

Buchwalder Sàrl

2824 Vicques · about 20.4 km

Buchwalder Sàrl in Vicques has specialized in the installation, repair, and renovation of heating and sanitary systems since 1966.

buchwalder-sarl.ch

Gyger Haustechnik

2824 Vicques · about 20.4 km

Gyger Haustechnik specializes in sanitary installations, heating systems, bathroom renovations, and tiling work.

gyger-co.ch

Sanit & Bilat Fils S.A.

2824 Vicques · about 20.4 km

Specialist since 1968 in sanitary installations, heating (gas, oil, wood, renewable energy), and tinsmithing with 24/7 emergency repair service.

sanit.ch

F. Imeri Sàrl

2829 Vermes · about 21.4 km

The website presented under the name Imeri Chauffage et Sanitaire Sàrl offers plumbing, heating and solar thermal work, while F. Imeri Sàrl’s registered purpose refers to a scrap metal business.

imeri-sarl.ch

Suggestions from the commercial register by distance and activity. Not an endorsement or partnership.

Works often combined in Reinach (BL)

Other works in Reinach (BL)

Heat pump installation in nearby towns