Canton
Solar PV — one-off payment (Valais)
Based on installed capacity; municipal premiums possible.
Federal one-off payment for PV; some Valais municipalities add premiums.
www.pronovo.chSolar panels · Naters
Solar panels in Naters
Indicative price, tips, grants and companies for your project in Naters (Valais).
At a glance
- Typical budget
- CHF 16'800 – CHF 30'500
- Midpoint
- CHF 23'000
- Grants found
- 1
- Nearby companies
- 4
Worked examples in Naters
Small project
CHF 9'100 – CHF 17'200
Typical project
CHF 16'800 – CHF 30'500
Large project
CHF 29'100 – CHF 51'700
| Project | Quantity | Low | High | Per unit |
|---|---|---|---|---|
| Small project | 5 kWc | CHF 9'100 | CHF 17'200 | CHF 2'600 |
| Typical project | 10 kWc | CHF 16'800 | CHF 30'500 | CHF 2'300 |
| Large project | 18 kWc | CHF 29'100 | CHF 51'700 | CHF 2'200 |
Computed with our estimator for Naters (regional factor included), standard finish. Only the project size changes.
Cost split (typical project)
- Labour : CHF 8'100 (35 %)
- Materials : CHF 12'700 (55 %)
- Other costs : CHF 2'300 (10 %)
What the price covers
Included
- Supply and installation
- VAT
- Inverter and grid connection
Not included
- Permits and architect fees
- Unexpected structural issues
- Possible subsidies
- Battery, roof refurbishment and structural reinforcement
Tips before you start
- The federal one-off remuneration (Pronovo) lowers the cost of small systems.
- Profitability depends mainly on how much power you use on site.
- A suitably integrated roof system often only needs notification.
Your project in 5 steps
1. Estimate
Set a budget range with the estimator.
2. Grants
Apply before work starts.
3. Quotes
Compare at least 3 quotes.
4. Permit
Check with the municipality whether a permit is needed.
5. Works
Follow the site and do a written handover.
Grants and subsidies
Check amounts and conditions with the provider before signing: apply before work starts in most cases.
Naters's housing stock in figures
The federal building register lists 2'731 residential buildings with 7'572 dwellings in Naters. 58% were built before 1980, before serious insulation standards, and 31% are still heated with oil or gas.
Only 6.6% of residential buildings in Naters report a solar thermal system in the register, so most roofs are still free. Photovoltaics are not recorded there; check the solar cadastre for your roof.
Age of residential buildings
- Before 191919 %
- 1919–19455 %
- 1946–19607 %
- 1961–197012 %
- 1971–198015 %
- 1981–199013 %
- 1991–200010 %
- 2001–20108 %
- Since 201111 %
Main heating energy
- Heating oil30 %
- Electricity27 %
- Wood21 %
- Heat pump19 %
- Solar thermal2 %
- Gas1 %
- District heating1 %
Heating and hot water: which energies?
| Energy | Heating | Hot water |
|---|---|---|
| Gas | 1 % | 0.7 % |
| Heating oil | 30 % | 24.4 % |
| District heating | 1 % | 0.3 % |
| Heat pump | 19 % | 4.9 % |
| Electricity | 27 % | 57.4 % |
| Wood | 21 % | 5.4 % |
| Solar thermal | 2 % | 6.5 % |
Each line gives the share of buildings using that energy, separately for heating and for hot water. The two columns do not always reach 100%: some buildings combine two systems, or reported none.
Type of heating system
- Boiler (unspecified)43.5 %
- Central electric heating24.7 %
- Heat pump18.6 %
- Stove7.6 %
- Direct electric heaters2.4 %
- Heat exchanger (district)0.7 %
A standard non-condensing boiler is usually older and less efficient.
Houses or apartment buildings?
- Single-family houses56.2 %
- Two-dwelling houses20.3 %
- Apartment buildings (3+)23.5 %
- Other0 %
5.4 % of buildings mix housing with shops or offices.
The typical building
- storeys (median)
- 2
- median footprint
- 98 m²
- median dwelling area
- 95 m²
Renovations, heritage and volumes
For renovation planning in Naters, federal building registry data provides essential context. Regarding building volume, the median is 769 m3 per SIA 416 standards, though this reflects measurements for only 43 out of 1534 houses, indicating partial data coverage. Concerning heritage protection, no buildings are currently designated as protected among the 370 known cases, while the status for 2361 units remains unknown. Given these gaps in recorded data, we strongly recommend contacting the municipality early in your project phase to confirm specific regulatory requirements or architectural restrictions before finalizing your insulation and heating upgrade plans.
0
buildings flagged as protected
status known for 370 of 2'731 buildings; check with the municipality
769 m³
median house volume (SIA 416)
measured for 43 of 1'534 houses
Source : OFS — RegBL (export communal complet). Existing residential buildings; percentages of recorded values.
Companies in the area
TZ Stromag, Filiale Fiesch
3984 Fiesch · about 10.7 km
TZ Stromag is a full-service provider of electrical engineering, specializing in installations, telematics, automation, and switchgear construction.
stromag.chTZ Stromag, Filiale Visp
3930 Visp · about 13.3 km
TZ Stromag offers comprehensive electrical engineering services for residential buildings, including installations, telematics services, and security.
stromag.chElektro Supersaxo AG
3930 Visp · about 13.3 km
Elektro Supersaxo AG in Visp specializes in general electrical installations and energy efficiency for households in the Valais region.
elektrosupersaxo.chElektro F. Imboden und Söhne AG
3930 Visp · about 13.3 km
Specialist for electrical installations, household appliances, and photovoltaic solutions based in Visp and Täsch.
imboden-elektro.chSuggestions from the commercial register by distance and activity. Not an endorsement or partnership.
Other works in Naters
Kitchen renovationBathroom renovationNew flooringInterior paintingWindow replacementRoof renovationFacade insulationHeat pump installationHome solar batterySolar water heatingTerrace constructionFence installationStairwell renovationElevator installation or upgrade