Canton
Heat pump grant — Valais
Flat contributions per kW or per installation depending on technology.
Valais supports renewable heating via the Buildings Programme and additional cantonal grants.
www.leprogrammebatiments.chHeat pump installation · Naters
Heat pump installation in Naters
Indicative price, tips, grants and companies for your project in Naters (Valais).
At a glance
- Typical budget
- CHF 38'600 – CHF 71'900
- Midpoint
- CHF 54'000
- Grants found
- 1
- Nearby companies
- 4
Worked examples in Naters
Small project
CHF 30'600 – CHF 55'900
Typical project
CHF 38'600 – CHF 71'900
Large project
CHF 50'600 – CHF 95'800
| Project | Quantity | Low | High | Per unit |
|---|---|---|---|---|
| Small project | 80 m² | CHF 30'600 | CHF 55'900 | CHF 500 |
| Typical project | 160 m² | CHF 38'600 | CHF 71'900 | CHF 300 |
| Large project | 280 m² | CHF 50'600 | CHF 95'800 | CHF 300 |
Computed with our estimator for Naters (regional factor included), standard finish. Only the project size changes.
Cost split (typical project)
- Labour : CHF 21'600 (40 %)
- Materials : CHF 27'000 (50 %)
- Other costs : CHF 5'400 (10 %)
What the price covers
Included
- Supply and installation
- VAT
- Heat pump and standard connections; removal and equipment only according to answers
Not included
- Permits and architect fees
- Unexpected structural issues
- Possible subsidies
- Drilling beyond 150 m, buried or contaminated tank, asbestos, insulation and new finishes
- With air-to-air: hot water and ducts only if selected; adaptations beyond the options excluded
Tips before you start
- First check whether your area can connect to a priority district heating network.
- The local design outdoor temperature sets the heat pump's capacity.
- Outdoor air-water heat pumps must meet noise limits towards neighbours.
Your project in 5 steps
1. Estimate
Set a budget range with the estimator.
2. Grants
Apply before work starts.
3. Quotes
Compare at least 3 quotes.
4. Permit
Check with the municipality whether a permit is needed.
5. Works
Follow the site and do a written handover.
Grants and subsidies
Check amounts and conditions with the provider before signing: apply before work starts in most cases.
Naters's housing stock in figures
The federal building register lists 2'731 residential buildings with 7'572 dwellings in Naters. 58% were built before 1980, before serious insulation standards, and 31% are still heated with oil or gas.
With 31% fossil heating and 57.4% electrically heated hot water, many buildings in Naters will need a new system. Planning ahead avoids deciding under pressure after a breakdown.
Age of residential buildings
- Before 191919 %
- 1919–19455 %
- 1946–19607 %
- 1961–197012 %
- 1971–198015 %
- 1981–199013 %
- 1991–200010 %
- 2001–20108 %
- Since 201111 %
Main heating energy
- Heating oil30 %
- Electricity27 %
- Wood21 %
- Heat pump19 %
- Solar thermal2 %
- Gas1 %
- District heating1 %
Heating and hot water: which energies?
| Energy | Heating | Hot water |
|---|---|---|
| Gas | 1 % | 0.7 % |
| Heating oil | 30 % | 24.4 % |
| District heating | 1 % | 0.3 % |
| Heat pump | 19 % | 4.9 % |
| Electricity | 27 % | 57.4 % |
| Wood | 21 % | 5.4 % |
| Solar thermal | 2 % | 6.5 % |
Each line gives the share of buildings using that energy, separately for heating and for hot water. The two columns do not always reach 100%: some buildings combine two systems, or reported none.
Type of heating system
- Boiler (unspecified)43.5 %
- Central electric heating24.7 %
- Heat pump18.6 %
- Stove7.6 %
- Direct electric heaters2.4 %
- Heat exchanger (district)0.7 %
A standard non-condensing boiler is usually older and less efficient.
Renovations, heritage and volumes
For renovation planning in Naters, federal building registry data provides essential context. Regarding building volume, the median is 769 m3 per SIA 416 standards, though this reflects measurements for only 43 out of 1534 houses, indicating partial data coverage. Concerning heritage protection, no buildings are currently designated as protected among the 370 known cases, while the status for 2361 units remains unknown. Given these gaps in recorded data, we strongly recommend contacting the municipality early in your project phase to confirm specific regulatory requirements or architectural restrictions before finalizing your insulation and heating upgrade plans.
0
buildings flagged as protected
status known for 370 of 2'731 buildings; check with the municipality
769 m³
median house volume (SIA 416)
measured for 43 of 1'534 houses
Source : OFS — RegBL (export communal complet). Existing residential buildings; percentages of recorded values.
Companies in the area
TZ Stromag, Filiale Raron
3942 Raron · about 14.7 km
TZ Stromag is a full-service provider of electrical engineering for buildings, covering installations, automation, security, and in-house switchgear construction.
stromag.chHallenbarter & Russi Gebäudetechnik AG
3988 Obergoms · about 29.4 km
Obergoms-based company specializing in sanitary installations, heating systems, roofing, and tinsmith work for new builds and renovations.
hallenbarter-russi.chClavien Fabrice Sanitaires Sàrl
3972 Miège · about 33.3 km
Clavien Fabrice Sanitaires Sàrl in Miège provides plumbing and heating installations, including heat pumps, as well as roofing work and the installation of solar thermal and photovoltaic panels.
fabriceclavien.chLehner SA, succursale de Veyras
3968 Veyras · about 35.3 km
Lehner SA offers plumbing installations, heating systems, and roofing and tinsmithing services in the canton of Valais.
lehnersa.chSuggestions from the commercial register by distance and activity. Not an endorsement or partnership.
Other works in Naters
Kitchen renovationBathroom renovationNew flooringInterior paintingWindow replacementRoof renovationFacade insulationSolar panelsHome solar batterySolar water heatingTerrace constructionFence installationStairwell renovationElevator installation or upgrade