Heat pump installation · Rapperswil-Jona

Heat pump installation in Rapperswil-Jona

Indicative price, tips, grants and companies for your project in Rapperswil-Jona (St. Gallen).
Heat pump installation – Rapperswil-Jona

At a glance

Typical budget
CHF 42'400 – CHF 78'900
Midpoint
CHF 59'300
Grants found
0
Nearby companies
4

Worked examples in Rapperswil-Jona

Small project

CHF 33'500 – CHF 61'400

Typical project

CHF 42'400 – CHF 78'900

Large project

CHF 55'600 – CHF 105'200

ProjectQuantityLowHigh
Small project80 m²CHF 33'500CHF 61'400
Typical project160 m²CHF 42'400CHF 78'900
Large project280 m²CHF 55'600CHF 105'200

Computed with our estimator for Rapperswil-Jona (regional factor included), standard finish. Only the project size changes.

Cost split (typical project)

  • Labour : CHF 23'700 (40 %)
  • Materials : CHF 29'600 (50 %)
  • Other costs : CHF 5'900 (10 %)

What the price covers

Included

  • Supply and installation
  • VAT
  • Heat pump and standard connections; removal and equipment only according to answers

Not included

  • Permits and architect fees
  • Unexpected structural issues
  • Possible subsidies
  • Drilling beyond 150 m, buried or contaminated tank, asbestos, insulation and new finishes
  • With air-to-air: hot water and ducts only if selected; adaptations beyond the options excluded

Rapperswil-Jona's housing stock in figures

In Rapperswil-Jona, the federal building register lists 3'786 residential buildings and 14'034 dwellings. These municipal benchmarks help put your home in context, but do not replace an individual assessment.

53 %built before 1980
54 %heated by oil or gas
3.8 %electric hot water
3.9 %with declared solar thermal

Age of residential buildings

53 % built before 1980

  • Before 19199 %
  • 1919–19459 %
  • 1946–196011 %
  • 1961–19709 %
  • 1971–198015 %
  • 1981–199016 %
  • 1991–200013 %
  • 2001–201010 %
  • Since 20119 %

Construction year does not reveal past renovations: check the current insulation condition.

Main heating energy

42 % · Heat pump

  • Heat pump42 %
  • Gas41 %
  • Heating oil13 %
  • Electricity2 %
  • Wood2 %

This distribution describes recorded buildings, not your system's consumption or efficiency.

Heating and hot water: which energies?

EnergyHeatingHot water
Gas41 %38.1 %
Heating oil13 %11.6 %
District heating0 %1.4 %
Heat pump42 %39.4 %
Electricity2 %3.8 %
Wood2 %1.4 %
Solar thermal0 %3.9 %

Each line gives the share of buildings using that energy, separately for heating and for hot water. The two columns do not always reach 100%: some buildings combine two systems, or reported none.

Type of heating system

  • Boiler (unspecified)54.8 %
  • Heat pump42 %
  • Central electric heating1.5 %
  • Condensing boiler1 %
  • Heat exchanger (district)0.5 %

A standard non-condensing boiler is usually older and less efficient.

Renovations, heritage and volumes

For homeowners planning renovations in Rapperswil-Jona, official RegBL figures provide essential planning guidance. Regarding heritage protection, 78 buildings are identified as protected out of 403 known cases, making early coordination with municipal authorities regarding permits vital. The median building volume of 590 cubic meters, based on the SIA 416 standard, helps estimate the scale required for heating or insulation upgrades. Please note that data coverage is partial; only 3 buildings are measured under the SIA 416 standard, and there is no recorded information regarding renovation years for the 3786 total buildings registered in the municipality.

78
buildings flagged as protected
status known for 403 of 3'786 buildings; check with the municipality
590 m³
median house volume (SIA 416)
measured for 3 of 2'079 houses

Source : OFS — RegBL (export communal complet). Existing residential buildings; percentages of recorded values.

Tips before you start

  • First check whether your area can connect to a priority district heating network.
  • The local design outdoor temperature sets the heat pump's capacity.
  • Outdoor air-water heat pumps must meet noise limits towards neighbours.

Your project in 5 steps

  1. 1. Estimate

    Set a budget range with the estimator.

  2. 2. Grants

    Apply before work starts.

  3. 3. Quotes

    Compare at least 3 quotes.

  4. 4. Permit

    Check with the municipality whether a permit is needed.

  5. 5. Works

    Follow the site and do a written handover.

Grants and subsidies

No specific grant listed for this work. Maintenance tax deductions may still apply.

Companies in the area

Hallenbarter & Russi Gebäudetechnik AG

3988 Obergoms · about 87.5 km

Obergoms-based company specializing in sanitary installations, heating systems, roofing, and tinsmith work for new builds and renovations.

hallenbarter-russi.ch

F. Imeri Sàrl

2829 Vermes · about 100.7 km

The website presented under the name Imeri Chauffage et Sanitaire Sàrl offers plumbing, heating and solar thermal work, while F. Imeri Sàrl’s registered purpose refers to a scrap metal business.

imeri-sarl.ch

Sanit & Bilat Fils S.A.

2824 Vicques · about 105.4 km

Specialist since 1968 in sanitary installations, heating (gas, oil, wood, renewable energy), and tinsmithing with 24/7 emergency repair service.

sanit.ch

Buchwalder Sàrl

2824 Vicques · about 105.4 km

Buchwalder Sàrl in Vicques has specialized in the installation, repair, and renovation of heating and sanitary systems since 1966.

buchwalder-sarl.ch

Suggestions from the commercial register by distance and activity. Not an endorsement or partnership.

Works often combined in Rapperswil-Jona

Other works in Rapperswil-Jona

Heat pump installation in nearby towns