Canton
Solar PV — one-off payment and Vaud support
One-off payment calculated on installed capacity (kWp).
Federal one-off payment for PV installations, sometimes topped up by cantonal or municipal grants.
www.pronovo.chSolar panels · Crissier
Solar panels in Crissier
Indicative price, tips, grants and companies for your project in Crissier (Vaud).
At a glance
- Typical budget
- CHF 18'100 – CHF 32'900
- Midpoint
- CHF 24'800
- Grants found
- 1
- Nearby companies
- 4
Worked examples in Crissier
Small project
CHF 9'800 – CHF 18'500
Typical project
CHF 18'100 – CHF 32'900
Large project
CHF 31'400 – CHF 55'800
| Project | Quantity | Low | High | Per unit |
|---|---|---|---|---|
| Small project | 5 kWc | CHF 9'800 | CHF 18'500 | CHF 2'800 |
| Typical project | 10 kWc | CHF 18'100 | CHF 32'900 | CHF 2'500 |
| Large project | 18 kWc | CHF 31'400 | CHF 55'800 | CHF 2'400 |
Computed with our estimator for Crissier (regional factor included), standard finish. Only the project size changes.
Cost split (typical project)
- Labour : CHF 8'700 (35 %)
- Materials : CHF 13'700 (55 %)
- Other costs : CHF 2'500 (10 %)
What the price covers
Included
- Supply and installation
- VAT
- Inverter and grid connection
Not included
- Permits and architect fees
- Unexpected structural issues
- Possible subsidies
- Battery, roof refurbishment and structural reinforcement
Tips before you start
- The federal one-off remuneration (Pronovo) lowers the cost of small systems.
- Profitability depends mainly on how much power you use on site.
- A suitably integrated roof system often only needs notification.
Your project in 5 steps
1. Estimate
Set a budget range with the estimator.
2. Grants
Apply before work starts.
3. Quotes
Compare at least 3 quotes.
4. Permit
Check with the municipality whether a permit is needed.
5. Works
Follow the site and do a written handover.
Grants and subsidies
Check amounts and conditions with the provider before signing: apply before work starts in most cases.
Crissier's housing stock in figures
The federal building register lists 1'171 residential buildings with 5'009 dwellings in Crissier. 41% were built before 1980, before serious insulation standards, and 61% are still heated with oil or gas.
Only 8.1% of residential buildings in Crissier report a solar thermal system in the register, so most roofs are still free. Photovoltaics are not recorded there; check the solar cadastre for your roof.
Age of residential buildings
- Before 19199 %
- 1919–19457 %
- 1946–19609 %
- 1961–19706 %
- 1971–198010 %
- 1981–199023 %
- 1991–200010 %
- 2001–20107 %
- Since 201118 %
Main heating energy
- Gas36 %
- Heating oil25 %
- Heat pump15 %
- Electricity14 %
- Wood7 %
- District heating3 %
Heating and hot water: which energies?
| Energy | Heating | Hot water |
|---|---|---|
| Gas | 36 % | 33.2 % |
| Heating oil | 25 % | 24.9 % |
| District heating | 3 % | 2.7 % |
| Heat pump | 15 % | 5.1 % |
| Electricity | 14 % | 19.4 % |
| Wood | 7 % | 7.1 % |
| Solar thermal | 0 % | 7.2 % |
Each line gives the share of buildings using that energy, separately for heating and for hot water. The two columns do not always reach 100%: some buildings combine two systems, or reported none.
Type of heating system
- Boiler (unspecified)53.4 %
- Heat pump14.9 %
- Central electric heating13.1 %
- Condensing boiler9 %
- Standard boiler5.2 %
- Heat exchanger (district)2.9 %
- Direct electric heaters0.9 %
- Stove0.5 %
A standard non-condensing boiler is usually older and less efficient.
Houses or apartment buildings?
- Single-family houses56.4 %
- Two-dwelling houses15.8 %
- Apartment buildings (3+)27.8 %
10.8 % of buildings mix housing with shops or offices.
The typical building
- storeys (median)
- 3
- median footprint
- 113 m²
- median dwelling area
- 76 m²
Renovations, heritage and volumes
For homeowners in Crissier, RegBL data is essential for planning renovations. With 363 buildings under heritage protection out of 477 known cases, contacting the municipality early regarding permits is highly recommended. The median house volume of 458 m3 for the 169 houses measured by the SIA 416 standard provides a baseline for estimating heating or insulation costs. Please note that data coverage is partial, as the heritage status remains unknown for 694 buildings, and a significant portion of the total housing stock was not measured using the specified standard, which may impact your project assessment.
363
buildings flagged as protected
status known for 477 of 1'171 buildings; check with the municipality
458 m³
median house volume (SIA 416)
measured for 169 of 660 houses
Source : OFS — RegBL (export communal complet). Existing residential buildings; percentages of recorded values.
Companies in the area
EVE Car Plug Suisse SA
1023 Crissier · about 0 km
EVE Car Plug specializes in the installation of electric vehicle charging stations and provides photovoltaic solutions in Switzerland.
evecarplug.comTini Toiture Sàrl
1023 Crissier · about 0 km
Tini Toiture Sàrl is a Crissier-based company specializing in roofing, sheet metal work, facade insulation, and solar panel installation.
tini-toiture.chBBL SA - VAUD
1023 Crissier · about 0 km
Groupe BBL SA is a construction company based in Crissier, specializing in building envelopes, renovation, and renewable energy.
groupebbl.chJuillard Ferblanterie et Sanitaire Sàrl
1023 Crissier · about 0 km
Company specializing in sheet metal work, roofing, sanitary installations, heating, and thermal insulation since 1963.
juillard-sanitaire-ferblanterie.chSuggestions from the commercial register by distance and activity. Not an endorsement or partnership.
Useful local data
Rules of the canton of Vaud
These rules apply across the whole canton, not only in this town.
Permits
- Legal basis : LATC et RLATC (BLV 700.11 et 700.11.1)
- Competent authority : Commune concernée, avec consultation des services cantonaux selon le projet
- Heat pump : Pour certaines pompes à chaleur desservant un bâtiment existant, une procédure d’annonce est prévue par l’article 68c RLATC, sous conditions. Si les conditions ne sont pas remplies, une procédure de permis de construire est nécessaire. Vérifiez votre cas auprès de la commune.
- Procedure : La procédure dépend de la nature des travaux et de la situation du bâtiment ; la commune confirme la procédure applicable.
Tax deductions
- Note : Le contribuable peut choisir, lors de chaque période fiscale et pour chaque immeuble, entre la déduction des frais effectifs et la déduction forfaitaire. La déduction forfaitaire couvre les frais d'entretien, de remise en état d'immeubles acquis récemment, d'administration par des tiers, d'investissements énergétiques, de démolition et de primes d'assurances.
- Carry-forward : Si les coûts d'investissement destinés à économiser l'énergie et à ménager l'environnement ou les frais de démolition en vue d'une construction de remplacement ne peuvent pas être entièrement pris en considération fiscalement durant l'année où ils ont été engagés, le solde peut être reporté sur les deux périodes fiscales suivantes. Les dépenses peuvent être reportées si le revenu net est négatif. Si des frais sont reportés, il n'est pas possible de faire valoir une déduction forfaitaire pendant cette période fiscale. En cas de déménagement en Suisse ou de transfert de la propriété de l'immeuble, le contribuable conserve le droit de déduire le solde des frais pouvant être reportés.
- Maintenance costs : Le contribuable qui possède des immeubles privés peut déduire les frais nécessaires à leur entretien, les primes d'assurances relatives à ces immeubles et les frais d'administration par des tiers.
- Energy investments : Sont réputés investissements destinés à économiser l'énergie et à ménager l'environnement les frais encourus en vue de rationaliser la consommation d'énergie ou de recourir aux énergies renouvelables. Ces investissements concernent le remplacement d'éléments de construction ou d'installations vétustes et l'adjonction d'éléments de construction ou d'installations dans des bâtiments existants. Si les mesures sont subventionnées par la collectivité publique, le contribuable ne peut déduire que les frais qu'il assume lui-même. Le taux de déduction est de 100%.
Source : Règlement sur la déduction des frais relatifs aux immeubles privés (RDFIP)
Other works in Crissier
Kitchen renovationBathroom renovationNew flooringInterior paintingWindow replacementRoof renovationFacade insulationHeat pump installationHome solar batterySolar water heatingTerrace constructionFence installationStairwell renovationElevator installation or upgrade