Indicative price, tips, grants and companies for your project in Kloten (Zurich).
At a glance
Typical budget
CHF 42'400 – CHF 78'900
Midpoint
CHF 59'300
Grants found
0
Nearby companies
4
Worked examples in Kloten
Small project
CHF 33'500 – CHF 61'400
Typical project
CHF 42'400 – CHF 78'900
Large project
CHF 55'600 – CHF 105'200
Project
Quantity
Low
High
Per unit
Small project
80 m²
CHF 33'500
CHF 61'400
CHF 600
Typical project
160 m²
CHF 42'400
CHF 78'900
CHF 400
Large project
280 m²
CHF 55'600
CHF 105'200
CHF 300
Computed with our estimator for Kloten (regional factor included), standard finish. Only the project size changes.
Cost split (typical project)
Labour :CHF 23'700(40 %)
Materials :CHF 29'600(50 %)
Other costs :CHF 5'900(10 %)
What the price covers
Included
Supply and installation
VAT
Heat pump and standard connections; removal and equipment only according to answers
Not included
Permits and architect fees
Unexpected structural issues
Possible subsidies
Drilling beyond 150 m, buried or contaminated tank, asbestos, insulation and new finishes
With air-to-air: hot water and ducts only if selected; adaptations beyond the options excluded
Kloten's housing stock in figures
In Kloten, the federal building register lists 1'952 residential buildings and 10'956 dwellings. These municipal benchmarks help put your home in context, but do not replace an individual assessment.
56 %built before 1980
61 %heated by oil or gas
19.1 %electric hot water
1.3 %with declared solar thermal
Age of residential buildings
56 % built before 1980
Before 19194 %
1919–19453 %
1946–196019 %
1961–197020 %
1971–198010 %
1981–199012 %
1991–200015 %
2001–20106 %
Since 201110 %
Construction year does not reveal past renovations: check the current insulation condition.
Main heating energy
49 % · Heating oil
Heating oil49 %
Heat pump28 %
Gas12 %
Wood6 %
District heating4 %
Electricity1 %
This distribution describes recorded buildings, not your system's consumption or efficiency.
Heating and hot water: which energies?
Energy
Heating
Hot water
Gas
12 %
9.5 %
Heating oil
49 %
39.3 %
District heating
4 %
3.5 %
Heat pump
28 %
21.6 %
Electricity
1 %
19.1 %
Wood
6 %
4.5 %
Each line gives the share of buildings using that energy, separately for heating and for hot water. The two columns do not always reach 100%: some buildings combine two systems, or reported none.
Type of heating system
Boiler (unspecified)58.3 %
Heat pump28.2 %
Condensing boiler6.3 %
Heat exchanger (district)4 %
Standard boiler1.7 %
Central electric heating0.8 %
Stove0.6 %
A standard non-condensing boiler is usually older and less efficient.
Renovations, heritage and volumes
For your renovation plans in Kloten, the federal building register data provides essential insights. With a median building volume of 748 m3 according to the SIA 416 standard, you can better estimate the scope of required heating or insulation works. Please note that the data coverage for volume is partial, as only 23 buildings have been officially measured out of 814 recorded houses. These figures allow you to assess renovation costs more accurately by aligning your budget and technical planning with the actual size of your property and the specific standards applicable within this municipality.
0
buildings flagged as protected
status known for 346 of 1'952 buildings; check with the municipality
First check whether your area can connect to a priority district heating network.
The local design outdoor temperature sets the heat pump's capacity.
Outdoor air-water heat pumps must meet noise limits towards neighbours.
Your project in 5 steps
1. Estimate
Set a budget range with the estimator.
2. Grants
Apply before work starts.
3. Quotes
Compare at least 3 quotes.
4. Permit
Check with the municipality whether a permit is needed.
5. Works
Follow the site and do a written handover.
Grants and subsidies
No specific grant listed for this work. Maintenance tax deductions may still apply.
Companies in the area
F. Imeri Sàrl
2829 Vermes · about 84.2 km
The website presented under the name Imeri Chauffage et Sanitaire Sàrl offers plumbing, heating and solar thermal work, while F. Imeri Sàrl’s registered purpose refers to a scrap metal business.