TZ Stromag, Filiale Fiesch
3984 Fiesch · about 68.9 km
TZ Stromag is a full-service provider of electrical engineering, specializing in installations, telematics, automation, and switchgear construction.
stromag.chSolar panels · Luzern

At a glance
Small project
CHF 8'700 – CHF 16'400
Typical project
CHF 16'000 – CHF 29'000
Large project
CHF 27'700 – CHF 49'200
| Project | Quantity | Low | High | Per unit |
|---|---|---|---|---|
| Small project | 5 kWc | CHF 8'700 | CHF 16'400 | CHF 2'400 |
| Typical project | 10 kWc | CHF 16'000 | CHF 29'000 | CHF 2'200 |
| Large project | 18 kWc | CHF 27'700 | CHF 49'200 | CHF 2'100 |
Computed with our estimator for Luzern (regional factor included), standard finish. Only the project size changes.
Included
Not included
In Luzern, the federal building register lists 7'159 residential buildings and 47'600 dwellings. These municipal benchmarks help put your home in context, but do not replace an individual assessment.
76 % built before 1980
Construction year does not reveal past renovations: check the current insulation condition.
50 % · Gas
This distribution describes recorded buildings, not your system's consumption or efficiency.
| Energy | Heating | Hot water |
|---|---|---|
| Gas | 50 % | 44.1 % |
| Heating oil | 23 % | 18.1 % |
| District heating | 6 % | 5 % |
| Heat pump | 17 % | 12.2 % |
| Electricity | 1 % | 16.6 % |
| Wood | 3 % | 1.8 % |
| Solar thermal | 0 % | 2 % |
Each line gives the share of buildings using that energy, separately for heating and for hot water. The two columns do not always reach 100%: some buildings combine two systems, or reported none.
A standard non-condensing boiler is usually older and less efficient.
16.4 % of buildings mix housing with shops or offices.
For your renovation plans in Lucerne, RegBL figures provide essential benchmarks, though coverage remains partial. With 1253 out of 7159 buildings identified as protected, you must contact the municipality early to address specific heritage requirements. Regarding building volume, the median of 1247 m3 according to SIA 416 helps determine the scale of potential heating or insulation improvements. As these volume metrics are based on only a small sample of the total building stock, we recommend a thorough site-specific assessment. Always verify these structural details early in your planning to ensure accurate budgeting for your upcoming renovation project.
Source : OFS — RegBL (export communal complet). Existing residential buildings; percentages of recorded values.
To lower the initial cost of your installation, the federal government offers valuable support. The federal one-off remuneration, managed by the Pronovo organization, is designed to significantly reduce the investment required for small solar systems.
This financial aid helps homeowners make their equipment profitable more quickly. It is advisable to check the current eligibility criteria with Pronovo before starting your project.
This federal measure is a major pillar in encouraging Swiss households to invest in solar photovoltaic systems for their roofs.
The financial profitability of a photovoltaic project does not depend solely on panel efficiency, but primarily on your ability to consume the energy produced. Maximizing your on-site consumption is the key to lowering energy bills over the long term.
By integrating smart devices or shifting your energy needs to sunny hours, you significantly improve your return on investment.
Consider analyzing your current usage patterns before sizing your system with RenoIndex to get a realistic budget estimate for your home.
This considerably simplifies administrative steps for homeowners. However, it remains essential to check for specific restrictions related to heritage protection or protected areas.
Before starting work, check with the relevant authorities to ensure your project complies with all applicable legal provisions.
Good planning starts with a reliable estimate. The cost of solar panels varies depending on surface area, technology, and installation complexity. Using digital tools helps avoid surprises during construction.
At RenoIndex, we offer a free budget estimate based on your project. This step gives you a clear vision of the necessary investments. By controlling your costs from the start, you ensure the long-term economic viability of your solar project in Lucerne.
1. Estimate
Set a budget range with the estimator.
2. Grants
Apply before work starts.
3. Quotes
Compare at least 3 quotes.
4. Permit
Check with the municipality whether a permit is needed.
5. Works
Follow the site and do a written handover.
No specific grant listed for this work. Maintenance tax deductions may still apply.
3984 Fiesch · about 68.9 km
TZ Stromag is a full-service provider of electrical engineering, specializing in installations, telematics, automation, and switchgear construction.
stromag.ch2832 Rebeuvelier · about 72.8 km
Eco6therm specializes in the installation of heating systems, particularly heat pumps, and solar photovoltaic energy solutions.
eco6therm.ch2740 Moutier · about 75.2 km
Moutier-based company specializing in tinsmithing, roofing, ventilated facades, and solar panel installation.
zbinden-joye.ch2740 Moutier · about 75.2 km
Company in Moutier specializing in plumbing, heating (oil, wood, heat pumps), and solar thermal and photovoltaic solutions.
bmonnerat.chSuggestions from the commercial register by distance and activity. Not an endorsement or partnership.
Most solar installations that are well-integrated into the roof only require a simple notification procedure with the relevant authorities, making the process much easier.
The federal government offers the one-off remuneration via Pronovo, which reduces the initial investment costs for small solar systems on your roof.
The key is self-consumption: use as much of the produced electricity as possible during sunny hours to minimize your demand from the public grid.
Use the free RenoIndex estimator to get a precise price range based on the specificities of your renovation project.