Window replacement · Prilly

Window replacement in Prilly

Indicative price, tips, grants and companies for your project in Prilly (Vaud).
Window replacement – Prilly

At a glance

Typical budget
CHF 7'800 – CHF 18'800
Midpoint
CHF 12'600
Grants found
1
Nearby companies
4

Worked examples in Prilly

Small project

CHF 5'100 – CHF 12'700

Typical project

CHF 7'800 – CHF 18'800

Large project

CHF 14'100 – CHF 32'900

ProjectQuantityLowHigh
Small project4 unitsCHF 5'100CHF 12'700
Typical project7 unitsCHF 7'800CHF 18'800
Large project13 unitsCHF 14'100CHF 32'900

Computed with our estimator for Prilly (regional factor included), standard finish. Only the project size changes.

Cost split (typical project)

  • Labour : CHF 4'400 (35 %)
  • Materials : CHF 6'900 (55 %)
  • Other costs : CHF 1'300 (10 %)

What the price covers

Included

  • Supply and installation
  • VAT
  • Frames, glazing and blinds according to answers, per window size; standard making good

Not included

  • Permits and architect fees
  • Unexpected structural issues
  • Possible subsidies
  • Sliding doors, roof windows, changes to openings

Tips before you start

  • Count your windows by size (small, standard, French doors, bays) for a fairer price.
  • Windows alone are rarely subsidised: grants usually target a full envelope renovation.
  • In protected areas or visible facades, frame shape and colour may be imposed.

Your project in 5 steps

  1. 1. Estimate

    Set a budget range with the estimator.

  2. 2. Grants

    Apply before work starts.

  3. 3. Quotes

    Compare at least 3 quotes.

  4. 4. Permit

    Check with the municipality whether a permit is needed.

  5. 5. Works

    Follow the site and do a written handover.

Grants and subsidies

Canton

Window replacement — Buildings Programme (VD)

Usually included in envelope renovation contributions (per m² or flat rate).

Window replacement can be subsidised when part of an energy renovation of the envelope.

www.leprogrammebatiments.ch

Check amounts and conditions with the provider before signing: apply before work starts in most cases.

Prilly's housing stock in figures

The federal building register lists 800 residential buildings with 7'304 dwellings in Prilly. 76% were built before 1980, before serious insulation standards, and 79% are still heated with oil or gas.

With 76% of buildings dating from before 1980, the envelope is often the biggest saving. 39.6% are one- or two-dwelling houses where the owner decides alone; in apartment buildings, plan for a co-owners' decision. Have asbestos and PCB checked first.

76 %built before 1980
79 %heated by oil or gas
5 %electric hot water
7.2 %with declared solar thermal

Age of residential buildings

  • Before 191910 %
  • 1919–194523 %
  • 1946–196024 %
  • 1961–197015 %
  • 1971–19804 %
  • 1981–19904 %
  • 1991–20005 %
  • 2001–20106 %
  • Since 201110 %

Main heating energy

  • Gas42 %
  • Heating oil37 %
  • Heat pump12 %
  • District heating7 %
  • Electricity1 %
  • Wood1 %

Houses or apartment buildings?

  • Single-family houses27 %
  • Two-dwelling houses12.6 %
  • Apartment buildings (3+)60.4 %

14.1 % of buildings mix housing with shops or offices.

The typical building

storeys (median)
3
median footprint
145 m²
median dwelling area
65 m²

Renovations, heritage and volumes

For your renovation plans in Prilly, RegBL data provides essential benchmarks despite partial coverage. Regarding heritage protection, 10 buildings are classified out of 67 known, necessitating early contact with the municipality for permits. For building volume, the median is 876 m3 based on the SIA 416 standard across 49 measured units. This figure is crucial for determining the scale of your heating and insulation upgrades. Please note that data regarding the renovation year is not available for this municipality. Using these specific figures will help you better prepare your budget and project scope for your local renovation.

10
buildings flagged as protected
status known for 67 of 800 buildings; check with the municipality
876 m³
median house volume (SIA 416)
measured for 49 of 216 houses

Source : OFS — RegBL (export communal complet). Existing residential buildings; percentages of recorded values.

Companies in the area

Menuiserie Villarejo Benitez

1008 Jouxtens-Mézery · about 0 km

Menuiserie Villarejo is a craft business based in Jouxtens-Mézery specializing in custom interior and exterior woodwork and renovation projects.

menuiserie-villarejo.ch

Ballifard Menuiserie SA

1008 Prilly · about 0 km

Ballifard Menuiserie SA specializes in indoor and outdoor woodwork, offering renovation and bespoke furniture creation services since 2006.

ballifardmenuiserie.ch

Bertusi Jean Paul Stores Sàrl

1020 Renens VD · about 1.4 km

Specialist in the manufacture and installation of blinds, awnings, shutters, and interior or exterior sun protection solutions in Renens.

bertusi.ch

SC Perfecta Sàrl

1020 Renens VD · about 1.4 km

Company specializing in joinery installation, suspended ceilings, light partitions, and construction site management in Renens.

sc-perfecta.digitalone.site

Suggestions from the commercial register by distance and activity. Not an endorsement or partnership.

Useful local data

Rules of the canton of Vaud

These rules apply across the whole canton, not only in this town.

Permits

  • Legal basis : LATC et RLATC (BLV 700.11 et 700.11.1)
  • Competent authority : Commune concernée, avec consultation des services cantonaux selon le projet
  • Heat pump : Pour certaines pompes à chaleur desservant un bâtiment existant, une procédure d’annonce est prévue par l’article 68c RLATC, sous conditions. Si les conditions ne sont pas remplies, une procédure de permis de construire est nécessaire. Vérifiez votre cas auprès de la commune.
  • Procedure : La procédure dépend de la nature des travaux et de la situation du bâtiment ; la commune confirme la procédure applicable.

Source : État de Vaud — Permis de construire (LATC / RLATC)

Tax deductions

  • Note : Le contribuable peut choisir, lors de chaque période fiscale et pour chaque immeuble, entre la déduction des frais effectifs et la déduction forfaitaire. La déduction forfaitaire couvre les frais d'entretien, de remise en état d'immeubles acquis récemment, d'administration par des tiers, d'investissements énergétiques, de démolition et de primes d'assurances.
  • Carry-forward : Si les coûts d'investissement destinés à économiser l'énergie et à ménager l'environnement ou les frais de démolition en vue d'une construction de remplacement ne peuvent pas être entièrement pris en considération fiscalement durant l'année où ils ont été engagés, le solde peut être reporté sur les deux périodes fiscales suivantes. Les dépenses peuvent être reportées si le revenu net est négatif. Si des frais sont reportés, il n'est pas possible de faire valoir une déduction forfaitaire pendant cette période fiscale. En cas de déménagement en Suisse ou de transfert de la propriété de l'immeuble, le contribuable conserve le droit de déduire le solde des frais pouvant être reportés.
  • Maintenance costs : Le contribuable qui possède des immeubles privés peut déduire les frais nécessaires à leur entretien, les primes d'assurances relatives à ces immeubles et les frais d'administration par des tiers.
  • Energy investments : Sont réputés investissements destinés à économiser l'énergie et à ménager l'environnement les frais encourus en vue de rationaliser la consommation d'énergie ou de recourir aux énergies renouvelables. Ces investissements concernent le remplacement d'éléments de construction ou d'installations vétustes et l'adjonction d'éléments de construction ou d'installations dans des bâtiments existants. Si les mesures sont subventionnées par la collectivité publique, le contribuable ne peut déduire que les frais qu'il assume lui-même. Le taux de déduction est de 100%.

Source : Règlement sur la déduction des frais relatifs aux immeubles privés (RDFIP)

Other works in Prilly

Window replacement in nearby towns