Canton
Facade insulation — Buildings Programme (VD)
Contribution per insulated m², depending on energy requirements met.
Grants for thermal insulation of the building envelope (walls, roof) via the Buildings Programme.
www.leprogrammebatiments.chRoof renovation · Rolle
Roof renovation in Rolle
Indicative price, tips, grants and companies for your project in Rolle (Vaud).
At a glance
- Typical budget
- CHF 29'700 – CHF 65'400
- Midpoint
- CHF 44'900
- Grants found
- 1
- Nearby companies
- 4
Worked examples in Rolle
Small project
CHF 16'400 – CHF 37'600
Typical project
CHF 29'700 – CHF 65'400
Large project
CHF 49'600 – CHF 107'200
| Project | Quantity | Low | High | Per unit |
|---|---|---|---|---|
| Small project | 70 m² | CHF 16'400 | CHF 37'600 | CHF 400 |
| Typical project | 140 m² | CHF 29'700 | CHF 65'400 | CHF 300 |
| Large project | 245 m² | CHF 49'600 | CHF 107'200 | CHF 300 |
Computed with our estimator for Rolle (regional factor included), standard finish. Only the project size changes.
Cost split (typical project)
- Labour : CHF 22'500 (50 %)
- Materials : CHF 18'000 (40 %)
- Other costs : CHF 4'500 (10 %)
What the price covers
Included
- Supply and installation
- VAT
- Covering, scaffolding, insulation and removal according to answers
Not included
- Permits and architect fees
- Unexpected structural issues
- Possible subsidies
- New roof structure, asbestos, roof windows and structural reinforcement
Tips before you start
- Insulating the roof together with the covering is often eligible for the Buildings Programme.
- Existing solar panels must be removed and refitted: budget for it.
- At altitude, snow loads and frost influence material choice.
Your project in 5 steps
1. Estimate
Set a budget range with the estimator.
2. Grants
Apply before work starts.
3. Quotes
Compare at least 3 quotes.
4. Permit
Check with the municipality whether a permit is needed.
5. Works
Follow the site and do a written handover.
Grants and subsidies
Check amounts and conditions with the provider before signing: apply before work starts in most cases.
Rolle's housing stock in figures
The federal building register lists 686 residential buildings with 2'877 dwellings in Rolle. 65% were built before 1980, before serious insulation standards, and 82% are still heated with oil or gas.
Only 5.7% of residential buildings in Rolle report a solar thermal system in the register, so most roofs are still free. Photovoltaics are not recorded there; check the solar cadastre for your roof.
Age of residential buildings
- Before 191928 %
- 1919–194513 %
- 1946–196011 %
- 1961–19707 %
- 1971–19806 %
- 1981–19906 %
- 1991–20006 %
- 2001–201017 %
- Since 20116 %
Main heating energy
- Gas60 %
- Heating oil22 %
- Heat pump12 %
- Electricity5 %
- Wood1 %
Heating and hot water: which energies?
| Energy | Heating | Hot water |
|---|---|---|
| Gas | 60 % | 57.4 % |
| Heating oil | 22 % | 22.7 % |
| Heat pump | 12 % | 6.5 % |
| Electricity | 5 % | 8.3 % |
| Wood | 1 % | 0.8 % |
| Solar thermal | 0 % | 3.9 % |
Each line gives the share of buildings using that energy, separately for heating and for hot water. The two columns do not always reach 100%: some buildings combine two systems, or reported none.
Type of heating system
- Boiler (unspecified)66.3 %
- Heat pump12.5 %
- Condensing boiler11.7 %
- Standard boiler4.1 %
- Central electric heating3.7 %
- Direct electric heaters0.7 %
- Stove0.6 %
A standard non-condensing boiler is usually older and less efficient.
Houses or apartment buildings?
- Single-family houses46.4 %
- Two-dwelling houses13.3 %
- Apartment buildings (3+)40.4 %
20.7 % of buildings mix housing with shops or offices.
The typical building
- storeys (median)
- 3
- median footprint
- 143 m²
- median dwelling area
- 90 m²
Renovations, heritage and volumes
When planning renovations in Rolle, note that official building register data is partially covered. With 24 out of 686 buildings officially listed under heritage protection, contacting the municipality early to discuss permits is essential. Regarding the scale of your insulation or heating projects, the median house volume of 944 m3, based on 74 houses measured via SIA 416 standards, provides a useful reference point. As volume data coverage is limited for many structures, it is advisable to consider your property's specific dimensions to ensure your renovation cost estimate remains accurate and well-aligned with local regulatory requirements.
24
buildings flagged as protected
status known for 121 of 686 buildings; check with the municipality
944 m³
median house volume (SIA 416)
measured for 74 of 318 houses
Source : OFS — RegBL (export communal complet). Existing residential buildings; percentages of recorded values.
Companies in the area
WURLOD & ROLAND S.à r.l.
1180 Rolle · about 0 km
Based in Rolle, the company provides plumbing and gas installations, bathroom and kitchen renovations, sheet-metal roofing and roof covering, and solar thermal and heat pump systems for hot water.
wurlodroland.comJotterand Charpentier/Bâtisseur SA
1180 Rolle · about 0 km
Rolle-based company specializing in timber framing, wood construction, roof renovation, facades, and flooring.
jotterand.chSylvain Carrard
1180 Rolle · about 0 km
Rolle-based company specializing in tinsmithing, roofing, and roof maintenance services.
sylvain-carrard.chChabloz, Chiovini & Associés Sàrl
1183 Bursins · about 2.9 km
Chabloz, Chiovini & Associés Sàrl, based in Bursins, specializes in carpentry, roofing, sheet metal work, eco-friendly insulation, and the construction of wooden terraces.
pikbois.chSuggestions from the commercial register by distance and activity. Not an endorsement or partnership.
Useful local data
Rules of the canton of Vaud
These rules apply across the whole canton, not only in this town.
Permits
- Legal basis : LATC et RLATC (BLV 700.11 et 700.11.1)
- Competent authority : Commune concernée, avec consultation des services cantonaux selon le projet
- Heat pump : Pour certaines pompes à chaleur desservant un bâtiment existant, une procédure d’annonce est prévue par l’article 68c RLATC, sous conditions. Si les conditions ne sont pas remplies, une procédure de permis de construire est nécessaire. Vérifiez votre cas auprès de la commune.
- Procedure : La procédure dépend de la nature des travaux et de la situation du bâtiment ; la commune confirme la procédure applicable.
Tax deductions
- Note : Le contribuable peut choisir, lors de chaque période fiscale et pour chaque immeuble, entre la déduction des frais effectifs et la déduction forfaitaire. La déduction forfaitaire couvre les frais d'entretien, de remise en état d'immeubles acquis récemment, d'administration par des tiers, d'investissements énergétiques, de démolition et de primes d'assurances.
- Carry-forward : Si les coûts d'investissement destinés à économiser l'énergie et à ménager l'environnement ou les frais de démolition en vue d'une construction de remplacement ne peuvent pas être entièrement pris en considération fiscalement durant l'année où ils ont été engagés, le solde peut être reporté sur les deux périodes fiscales suivantes. Les dépenses peuvent être reportées si le revenu net est négatif. Si des frais sont reportés, il n'est pas possible de faire valoir une déduction forfaitaire pendant cette période fiscale. En cas de déménagement en Suisse ou de transfert de la propriété de l'immeuble, le contribuable conserve le droit de déduire le solde des frais pouvant être reportés.
- Maintenance costs : Le contribuable qui possède des immeubles privés peut déduire les frais nécessaires à leur entretien, les primes d'assurances relatives à ces immeubles et les frais d'administration par des tiers.
- Energy investments : Sont réputés investissements destinés à économiser l'énergie et à ménager l'environnement les frais encourus en vue de rationaliser la consommation d'énergie ou de recourir aux énergies renouvelables. Ces investissements concernent le remplacement d'éléments de construction ou d'installations vétustes et l'adjonction d'éléments de construction ou d'installations dans des bâtiments existants. Si les mesures sont subventionnées par la collectivité publique, le contribuable ne peut déduire que les frais qu'il assume lui-même. Le taux de déduction est de 100%.
Source : Règlement sur la déduction des frais relatifs aux immeubles privés (RDFIP)
Other works in Rolle
Kitchen renovationBathroom renovationNew flooringInterior paintingWindow replacementFacade insulationHeat pump installationSolar panelsHome solar batterySolar water heatingTerrace constructionFence installationStairwell renovationElevator installation or upgrade