Canton
Heat pump grant — Valais
Flat contributions per kW or per installation depending on technology.
Valais supports renewable heating via the Buildings Programme and additional cantonal grants.
www.leprogrammebatiments.chHeat pump installation · Fully
Heat pump installation in Fully
Indicative price, tips, grants and companies for your project in Fully (Valais).
At a glance
- Typical budget
- CHF 41'600 – CHF 77'500
- Midpoint
- CHF 58'200
- Grants found
- 1
- Nearby companies
- 4
Worked examples in Fully
Small project
CHF 32'900 – CHF 60'300
Typical project
CHF 41'600 – CHF 77'500
Large project
CHF 54'600 – CHF 103'300
| Project | Quantity | Low | High | Per unit |
|---|---|---|---|---|
| Small project | 80 m² | CHF 32'900 | CHF 60'300 | CHF 600 |
| Typical project | 160 m² | CHF 41'600 | CHF 77'500 | CHF 400 |
| Large project | 280 m² | CHF 54'600 | CHF 103'300 | CHF 300 |
Computed with our estimator for Fully (regional factor included), standard finish. Only the project size changes.
Cost split (typical project)
- Labour : CHF 23'300 (40 %)
- Materials : CHF 29'100 (50 %)
- Other costs : CHF 5'800 (10 %)
What the price covers
Included
- Supply and installation
- VAT
- Heat pump and standard connections; removal and equipment only according to answers
Not included
- Permits and architect fees
- Unexpected structural issues
- Possible subsidies
- Drilling beyond 150 m, buried or contaminated tank, asbestos, insulation and new finishes
- With air-to-air: hot water and ducts only if selected; adaptations beyond the options excluded
Tips before you start
- First check whether your area can connect to a priority district heating network.
- The local design outdoor temperature sets the heat pump's capacity.
- Outdoor air-water heat pumps must meet noise limits towards neighbours.
Your project in 5 steps
1. Estimate
Set a budget range with the estimator.
2. Grants
Apply before work starts.
3. Quotes
Compare at least 3 quotes.
4. Permit
Check with the municipality whether a permit is needed.
5. Works
Follow the site and do a written handover.
Grants and subsidies
Check amounts and conditions with the provider before signing: apply before work starts in most cases.
Fully's housing stock in figures
The federal building register lists 2'542 residential buildings with 4'720 dwellings in Fully. 42% were built before 1980, before serious insulation standards, and 21% are still heated with oil or gas.
With 21% fossil heating and 58.8% electrically heated hot water, many buildings in Fully will need a new system. Planning ahead avoids deciding under pressure after a breakdown.
Age of residential buildings
- Before 191911 %
- 1919–19458 %
- 1946–19609 %
- 1961–19707 %
- 1971–19807 %
- 1981–199012 %
- 1991–200011 %
- 2001–201017 %
- Since 201118 %
Main heating energy
- Heat pump46 %
- Electricity22 %
- Heating oil21 %
- Wood10 %
Heating and hot water: which energies?
| Energy | Heating | Hot water |
|---|---|---|
| Heating oil | 21 % | 22.7 % |
| Heat pump | 46 % | 13.3 % |
| Electricity | 22 % | 58.8 % |
| Wood | 10 % | 1.4 % |
| Solar thermal | 0 % | 2.7 % |
Each line gives the share of buildings using that energy, separately for heating and for hot water. The two columns do not always reach 100%: some buildings combine two systems, or reported none.
Type of heating system
- Heat pump46.8 %
- Boiler (unspecified)24.9 %
- Central electric heating19.8 %
- Stove6.2 %
- Direct electric heaters1.5 %
A standard non-condensing boiler is usually older and less efficient.
Renovations, heritage and volumes
For renovation projects in Fully, the median building volume of 767 m3 serves as a vital benchmark for scaling heating or insulation upgrades according to the SIA 416 standard, though data coverage is limited across the 2542 total buildings. Regarding heritage protection, no specific protected status is recorded for the 164 buildings with known data. Because coverage is partial, we strongly recommend contacting the municipality early in your planning process. Engaging with local authorities ensures you identify any potential architectural constraints or historical requirements that may affect your permits or the scope of your renovation work.
0
buildings flagged as protected
status known for 164 of 2'542 buildings; check with the municipality
767 m³
median house volume (SIA 416)
measured for 100 of 1'840 houses
Source : OFS — RegBL (export communal complet). Existing residential buildings; percentages of recorded values.
Companies in the area
Clavié Bati Renov
1926 Fully · about 0 km
General renovation company in Carouge specializing in full renovations, painting, and multi-trade project management since 1998.
bati-renov.chLéonard Roduit Sàrl
1926 Fully · about 0 km
Léonard Roduit Sàrl specializes in the installation, maintenance, and repair of sanitary equipment, heating systems, heat pumps, and ventilation.
leonard-roduit.chPellouchoud & Cie Electricité-Chauffage
1926 Fully · about 0 km
Valais-based specialist since 1970 in electrical installations, Stiebel Eltron heat pumps, photovoltaic, and solar thermal systems.
pellouchoud.chSETELEC SA
1913 Saillon · about 5.3 km
Valais-based company specializing in photovoltaics, electrical installations, heat pumps, and household appliance sales for residential clients.
setelec.chSuggestions from the commercial register by distance and activity. Not an endorsement or partnership.
Other works in Fully
Kitchen renovationBathroom renovationNew flooringInterior paintingWindow replacementRoof renovationFacade insulationSolar panelsHome solar batterySolar water heatingTerrace constructionFence installationStairwell renovationElevator installation or upgrade